4-2 E-mail / I-Fax settings
E-mail settings
NOTE: In order to use the e-mail and Internet fax function on your machine, the
“SMTP/POP” settings and “E-mail Settings” must be setup. These settings can
be configured using the Web Browser.
Using the web browser, you can check and configure all the network settings for
your machine. For more information on using the web browser, refer to “Chap-
ter 5: Using the web browser to change settings” on page 5-1.
NOTE: If you want to change settings through the web browser, you must first register
an IP address on the machine. (Refer to page 2-5.)
SMTP/POP Settings
1
Type your machine’s IP address into the URL address field on your web
browser (ex. http://200.1.37.99/).
2
Click [SMTP/POP] under the “Configuration” column.
3
Enter the e-mail server settings.
See the following page for a description of each item.
To Next Page
Loading...
