Muratec MFX-2030 - Network Settings; LDAP Parameter Settings; Configuring LDAP Parameter Settings

3-17LDAP server settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
LDAP server settings
LDAP parameter settings
NOTE: If you are unsure about these settings, consult your system administrator.
Configuring LDAP parameter settings
1
Press [Setting] on the control panel.
2
Press [Management], [Network Settings], and [LDAP Settings] in this order.
3
Press [LDAP Parameter Settings].
4
Select an attribute you want to configure.
5
Enter the attribute and press [Enter].