Muratec MFX-3530 Administrator's Guide

1-6 Checking the machine information
Checking the machine information
You can check the IP address and network settings of the machine, the status of optional
equipment and consumables, and the number of pages that have been printed with each
mode.
1
Press [Machine Info] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Machine Info].
3
Check the machine information, and press [Print] if you want to print it.
If you do not want to print the information, press [Close].
4
Press [Yes].
Press [ON] to enable duplex printing, or [OFF] to disable it.
NOTE
The toner and drum remaining percentage displayed on the screen are only for a
rough estimate.

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English