Muratec MFX-3530 Administrator's Guide

2-2 Machine management settings
Machine management settings
You can specify the important settings related to the machine, such as the user install
mode and security communication settings, and network settings, etc.
If you set an administrator password, a screen for entering the administrator password is
displayed whenever you press [Management], which enables you to prevent users other
than the administrator from changing the settings. Once you enter the administrator
password, you can set the setting continuously in “Management”.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Select the function you want to set.

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English