Muratec MFX-3530 - TCP;IP Settings

1
2
Management
Specifying the network settings 2-19
TCP/IP settings

Setting operation
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Select “TCP/IP Settings”, and press [Enter].
5
Select the item you want to set, and press [Enter].
For details on the settings, see “List of TCP/IP settings” (page 2-20).
6
Enter the desired value, and press [Enter].