Muratec MFX-3530 Administrator's Guide

1
2
Management
Machine management settings 2-3
List of machine management settings
Function Description Settings Reference page
Security
Communication
You can specify the various security
communication settings, such as
closed transmission, ID check,
destination confirmation, and
security reception settings.
•Closed Transmission
OFF
ON
•Closed Reception
OFF
ON
•Passcode
0000 to 9999:
(not registered)
•ID Check Tx
OFF
ON
•Conrm Destination
OFF
ON
Broadcast Only
•Conrm Speed-Dial
OFF
ON
•
Confirm Numeric keys
OFF
ON
•Broadcast Tx
OFF
ON
•Secure Reception
OFF
ON (current time)
Chapter 4,
“Security fax
functions” in the
Scanner and Fax
Guide.
Function
Protect Setting
You can manage the various settings
using an administrator password
and protect passcode.
Prohibited
Protect ON
Protect OFF
2-9
Mode Protect
Setting
You can set the machine to prohibit
the copy, scan, fax, or print modes
from being used.
OFF
ON
2-13
User Access
Management
You can reset the counter. 2-15
Network
Settings
You can set the network settings for
using the machine on a network.
2-16
User Install You can specify the settings required
for using the machine.
Chapter 7, “Initial
setup (User
Install)” in the
Scanner and Fax
Guide.
Mirroring You can copy the settings
information to another machine
between same model.
2-34

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English