Muratec MFX-3530 Administrator's Guide

2-32 Specifying the network settings
Setting an e-mail gateway
The e-mail gateway function enables you to send a fax to a fax server so that the server
sends the data through public line to the destinations. Consult the instruction manual of
your fax server how to use the function.
NOTE
For details on transmitting faxes using the e-mail gateway function, see chapter 4,
“Transmission related settings” in the Scanner and Fax Guide.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Press [e-mail Gateway].
5
Press [Setting].
6
Select [ON], and press [Enter].
Select [OFF] to deselect this function.
7
Press [Prefix].
8
Enter the prefix to add before the fax number using the numeric keys, and press
[Enter].
9
Press [Suffix].
10
Enter the suffix to add to the end of the fax number using the numeric keys,
and press [Enter].
11
Press [File Format].

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English