1
2
Management
Setting mode protection 2-13
Setting mode protection
You can protect copy, scanner, fax, or printer modes from being used.
For example, if you enable copy mode protection, the machine will not switch to the copy
screen.
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Mode Protect Setting].
4
Select the function to set, and press [Enter].
5
Select [ON], and press [Enter].
Select [OFF] to deselect this function.
To Next Page
Loading...
Need help?
General
