1
Using common functions
Using My Jobs 1-11
3
Press [Add].
When editing, select the job you want to edit, and press [Edit]. Proceed to step 7.
4
Select the type of job you want to register.
5
Press [Yes].
6
Perform the operation you want to register, and press <Start>.
7
To register the job name, press [Title].
When you do not register the title (job name), the mode name will be displayed as a title (job
name) on My Job list.
8
Enter the job name, and press [Enter].
Up to 40 characters can be entered.
9
Press [Start].
To Next Page
Loading...
Need help?
General
