Muratec MFX-3530 Administrator's Guide

2-6 Setting security codes
5
Enter the password again, and press [Enter].

Editing / deleting the administrator password
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
3
Enter the administrator password, and press [Enter].
4
Press [Admin Password].
5
Enter the new password, and press [Enter].
• Up to 28 characters can be entered.
• To delete the password, press [Enter] without entering a new password.
6
Enter the new password again, and press [Enter].

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English