Muratec MFX-3530 Administrator's Guide

2-26 Specifying the network settings

Printing the LDAP setting list
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Network Settings].
4
Press [LDAP Server Setting].
5
Press [List].
6
Press [Yes].
Press [ON] to enable duplex printing, or [OFF] to disable it.
NOTE
Also, you can print the LDAP server list by following procedure.
Press [Setting] on My MFP Menu screen

[List]

[LDAP Server]

[Yes].
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP
Menu screen is displayed.

Muratec MFX-3530 Specifications

General

Brand	Muratec
Model	MFX-3530
Category	Copier
Language	English