Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 107
Print Setup
(cont.)
Color Menu
(cont.)
Adjust Density Execute Selecting this will
perform the auto
density set up
immediately.
Color Tuning/Print
Pattern
Execute Selecting this item
prints the colour tuning
pattern to help you
adjust the colour
balance.
Cyan Highlight -3 ~ 0 ~ +3 Adjusts image density
for each colour
component (cyan,
magenta, yellow and
black). Normal setting is
0.
Cyan Mid-Tone -3 ~ 0 ~ +3
Cyan Dark -3 ~ 0 ~ +3
Magenta Highlight -3 ~ 0 ~ +3
Magenta Mid-Tone -3 ~ 0 ~ +3
Magenta Dark -3 ~ 0 ~ +3
Yellow Highlight -3 ~ 0 ~ +3
Yellow Mid-Tone -3 ~ 0 ~ +3
Yellow Dark -3 ~ 0 ~ +3
Black Highlight -3 ~ 0 ~ +3
Black Mid-Tone -3 ~ 0 ~ +3
Black Dark -3 ~ 0 ~ +3
Cyan Darkness -3 ~ 0 ~ +3 Adjusts darkness of
each colour (cyan,
magenta, yellow and
black). Normal setting is
0.
Magenta Darkness -3 ~ 0 ~ +3
Yellow Darkness -3 ~ 0 ~ +3
Black Darkness -3 ~ 0 ~ +3
Adjust Registration Execute Performs automatic
colour registration
adjustment. Normally
this is done on power on
and when the top cover
is opened and then
closed. This process
accurately aligns the
cyan, magenta and
yellow images to the
black image.
Cyan Reg Fine Adj -3 ~ 0 ~ +3 Performs fine
adjustment of image
timing in relation to the
black image component.
Magenta Reg Fine
Adj
-3 ~ 0 ~ +3
Yellow Reg Fine Adj -3 ~ 0 ~ +3
Ink Simulation OFF, SWOP,
EUROSCALE, JAPAN
Selects from a range of
industry standard colour
swatches.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English