Appendix A - menu system > 108
Print Setup
(cont.)
Color Menu
(cont.)
UCR Low, Medium, High Selects the limitation of
the toner layer
thickness.
If paper curl occurs in
dark printing, selecting
Medium or Low
sometimes helps reduce
curl.
CMY100% Density Enable, Disable When enabled, black
areas are produced
using 100% C, M, and Y
instead of black. This
results in a glossier
finish.
CMYK Conversion ON, OFF Setting to OFF will
simplify the conversion
process of CMYK data,
which will reduce
process time.
This setting is ignored
when Ink Simulation
function is used.
System
Configuration
Menu
Personality Auto Emulation, PCL,
IBM PPR, EPSON FX,
PS3 Emulation
This item selects which
industry standard
emulation your MFP
should use. When set to
Auto, incoming data is
examined and the
correct emulation is
automatically selected
each time a print job is
received.
Alarm Release Manual, Auto When Manual, non-
critical warnings, such
as requests for a
different paper size, can
be cleared by pressing
the RESET button.
When set to Auto, they
are cleared when the
print job resumes.
Auto Continue ON, OFF Determines whether or
not the MFP will
automatically recover
from a memory
overflow condition.
Error Report ON, OFF If ON, the MFP will print
error details when a
PostScript emulation
error occurs.
ITEM OPTION VALUE/DESCRIPTION
To Next Page
Loading...
Need help?
General
