Muratec MFX-C2700 User Manual (English)

Other manuals for Muratec MFX-C2700

User Guide166 pages

Brochure & Specs6 pages

Questions and Answers:

C
Carolyn CopelandSep 1, 2025
Why won't my Muratec All in One Printer dial a telephone number?
- B
  Brian MacdonaldSep 1, 2025
  If your Muratec All in One Printer is not dialing, check these potential causes: * Ensure the telephone line (not external telephone or handset) is connected to the LINE socket on the back of the machine. * If there is no dial tone, there may be a problem with the telephone line. If an external telephone is installed, lift the handset and check for a dial tone. * The machine may be using the wrong dialing method (pulse or tone) for the region. If alternating tones are heard instead of dialing pulses and the region uses pulse dialing, change the call parameters.
S
Stephanie FoleyAug 30, 2025
Why does toner come off when rubbed on prints from my Muratec All in One Printer?
- O
  ortizwilliamAug 30, 2025
  If the toner comes off when rubbed on prints from your Muratec All in One Printer, it could be due to: * Incorrect paper settings: Set the correct value of media type and media weight in the Media menu or set one value lighter for media weight. * Using recycled paper: Set one value thicker for media weight in the Media menu.
J
Jeffrey AyalaAug 29, 2025
Why is the white area of paper lightly stained when printing with my Muratec All in One Printer?
- M
  Michael StephensAug 29, 2025
  If the white area of the paper is lightly stained when printing with your Muratec All in One Printer, it could be due to: * Static in the paper: Use paper stored in proper temperature and humidity conditions. * Paper being too thick: Use thinner paper. * Low toner: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem persists, replace the toner cartridge.
A
amolinaAug 27, 2025
How do I fix horizontal lines and spots on my Muratec MFX-C2700?
- Q
  qwilliamsAug 27, 2025
  If you're seeing horizontal lines and spots periodically on your Muratec All in One Printer output, here's what might be happening: * If the interval is about 94mm (4in), the image drum (the green tube) is damaged or dirty: Wipe it lightly with a soft cloth. Replace the image drum cartridge when it is damaged. * If the interval is about 30mm (1.2in), there may be foreign particles in the image drum cartridge: Open/close the top cover, and print again. * If the interval is about 86mm (3.4in), the fuser unit is damaged: Replace the fuser unit. * The image drum cartridge has been exposed to light: Replace the image drum cartridge if the problem is not resolved.
D
Daniel BatesAug 27, 2025
Why are printed images fading vertically on my Muratec All in One Printer?
- L
  Leslie WilliamsAug 27, 2025
  If printed images are fading vertically when using your Muratec All in One Printer, consider these potential causes: * A dirty LED head: Wipe the LED head with a soft, lint-free cloth. * Low toner: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem continues, replace the toner cartridge. * Unsuitable paper: Use recommended paper.
D
David DavisAug 25, 2025
What to do if vertical lines appear on Muratec MFX-C2700 All in One Printer prints?
- K
  Krystal LewisAug 25, 2025
  If vertical lines are appearing on your Muratec All in One Printer prints, it could be due to: * A damaged image drum cartridge: replace it. * Low toner: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem persists, replace the toner cartridge.
L
linda89Aug 23, 2025
Why is my Muratec MFX-C2700 All in One Printer printing light?
- K
  Kristy LongAug 23, 2025
  If your Muratec All in One Printer is printing too lightly, here are some possible reasons and solutions: * The toner cartridge may not be properly seated: try reinstalling it. * The toner could be low: Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the issue persists, replace the toner cartridge. * The paper might be moist: Use paper stored in proper temperature and humidity conditions. * The paper might not be suitable for the printer: Use recommended paper. * The paper thickness and type might be inappropriate: Set the correct media type and weight in the Media menu, or choose one value thicker for media weight. * If you're using recycled paper: Set one value thicker for media weight in the Media menu.