Section 40 00-02-0716
2013-06-03 - 2 -
User Interface and Navigation
This section defines how to navigate through the EMS PRO user interface. It will assist the user in
understanding the screens and keys used to modify settings and how each works.
Membrane Keypad
The membrane keypad is made up of eight buttons. All of the functions for the EMS PRO can be set
using these eight buttons.
ICON Description
“START” = In the “MAN” (manual) mode this will initiate a start sequence. Can be used for
local auto start if “Local Pushbutton” is selected in start/stop type, S35.
“STOP” = In the “MAN” (manual) mode this will initiate a stop sequence. Can be used for
local auto stop if “Local Pushbutton” is selected in start/stop type, S35.
“THROTTLE INCREASE” = In the “MAN” (manual) mode this will increase engine speed.
“THROTTLE DECREASE” = In the “MAN” (manual) mode this will decrease engine speed.
“MENU” = Toggles between the front display and the password window and allows user to
exit menus.
“UP” arrow = Scrolling on the front display, scrolling through and increasing values in the “S”
& “P” numbers.
“DOWN” arrow = Scrolling on the front display, scrolling through and decreasing values in the
“S” & “P” numbers.
“ENTER” = Getting into the “S” or “P” numbers group after the correct entry code is entered,
getting into an actual “S” or “P” number selected to make changes.
To Next Page
Loading...
Need help?
General
