Need help?Do you have a question about the Murr Elektronik MVK-MPNIO Series and is the answer not in the manual?
General| Communication Protocol | PROFINET |
|---|---|
| Protection Class | IP67 |
| Housing Material | Plastic |
| Communication interface | PROFINET |
| Supply Voltage | 24 V DC |
| Operating Temperature | -20 °C to +60 °C |
| Number of digital inputs | 8 |
| Number of digital outputs | 8 |
| Output current | 0.5 A |
| Operating temperature range | -20 °C to +60 °C |
Provides information on customer service and support options.
Details the items included in the product package.
Describes the manual's scope, hardware, software, and purpose.
Explains symbols used for safety, notes, and recommendations.
Lists trademarks used in the documentation.
Outlines essential safety rules for electrical engineering and qualified personnel.
Defines the designated use of the MVK-MPNIO module and foreseeable misuse.
Provides guidance on proper disposal of the device and its packaging.
Explains the coding scheme for product designations and their functions.
Details the PROFINET IO communication protocol and its specifications.
Explains the IO-Link communication standard for connecting sensors and actuators.
Describes the physical properties and structure of the MVK-MPNIO module.
Details technical specifications for the MVK-MPNIO DIO16 IRT model.
Details technical specifications for the MVK-MPNIO DIO14 IOL2 IRT model.
Details technical specifications for the MVK-MPNIO DIO12 IOL4 IRT model.
Outlines conditions and requirements for mounting the module.
Shows the physical dimensions of the module with a diagram.
Specifies recommended distances for mounting to ensure heat dissipation and proper installation.
Provides detailed instructions for installing the module, including fastening and grounding.
Covers the electrical installation process, including safety warnings.
Details how to connect sensors and actuators using M12 ports.
Explains how to connect the Ethernet bus to the module.
Describes how to connect the power supply to the module.
Explains how to ensure the IP67 degree of protection by sealing connectors.
Guides on installing GSDML files for device description in engineering software.
Explains how to configure modules using the hardware catalog for IO-Link ports and virtual modules.
Outlines the basic configuration steps for different module types in TIA Portal.
Details configuring modules with diagnostic submodules for better monitoring.
Explains the various parameterization options available for the module, including diagnostic and tool parameters.
Details the methods for configuring IO-Link devices, including integration and data exchange.
Explains the different types of data exchange in IO-Link communication.
Guides on identifying and assigning PROFINET device names and IP addresses for network setup.
Explains how to set up the network topology for PROFINET devices using the Engineering Tool.
Details steps for configuring Fast Start-Up (FSU) for the module to achieve desired run-time characteristics.
Describes the configuration process for Media Redundancy Protocol (MRP) using Siemens TIA Portal.
Explains the configuration for Isochronous Real Time (IRT) communication, requiring specific hardware.
Details the procedure for configuring Shared Device functionality for simultaneous access from multiple controllers.
Explains how to send SNMP requests and the module's response structure for network monitoring.
Guides on configuring PROFIenergy for different energy-saving modes and their indicators.
Explains how to reset the module to factory settings, with options to retain or delete I&M data.
Explains the meaning of various LEDs for digital inputs, outputs, bus status, and power.
Provides detailed LED indications for PROFIenergy, firmware updates, and factory resets.
Details how the module sends diagnostic information in the form of alarms based on PROFINET specifications.
Lists general diagnostic messages, their error types, meanings, and recommended actions.
Lists diagnostic messages specific to IO-Link ports with error types and actions.
Lists diagnostic messages at IO-Link ports, categorized by IO-Link event codes.
Provides instructions on how to clean the module using oil-free compressed air or spirit and lint-free materials.
Lists available accessories for the module, including parts and tools.
Provides definitions for technical terms used in the manual.
States warranty exclusions and liability limitations for the technical documentation.
Outlines restrictions on transferring, copying, or divulging the documentation.
Grants customers a license to use the documentation for their own technical documentation.
To Next Page
