Start-up
User manual 55530_hdb_en_16 53 / 156
7 Start-up
WARNING!
Risk of burns
It is prohibited to separate or establish electrical connections during operation!
If this warning is ignored, there is a danger of electric arcing, which could lead
to burns.
Disconnect the module from the power supply.
CAUTION!
Uncontrolled processes
Personal injury and material damage due to incorrectly performed start-up
phases (for example first start-up, recommissioning and configuration chang-
es).
Always perform start-up in this sequence:
1 | Insert the module.
2 | System check and approval by an expert.
3 | Put into operation.
NOTICE
Functional errors in residential areas
Devices of EMC Class A may cause interferences in residential areas.
It is the operator's duty to take necessary precautions.
7.1 Loading GSDML Files
GSDML files Install GSDML files or install device description file
The import procedure for the GSDML files is described in your engineering
software manual. In the engineering software, this is referred to as "Install
GSDML files" or "Install device description file".
NOTE
You can find the GSDML file in the Online Shop of Murrelektronik GmbH under
the module article number in the download area under configuration file.
To Next Page
Loading...
Need help?
General
