Need help?Do you have a question about the Murr Elektronik Data Panel xtreme DB DP-34044-1 and is the answer not in the manual?
General| Brand | Murr Elektronik |
|---|---|
| Model | Data Panel xtreme DB DP-34044-1 |
| Category | Control Unit |
| Language | English |
Details the default configuration and necessary commands for module setup.
Describes global output configuration settings via PGN 61408.
Explains different output modes like On/Off, PWM, and Amps.
Covers PWM current control, including loop tuning (Kp and Ki).
Explains global input configuration settings via PGN 61408, focusing on digital inputs.
Details individual input configuration using PGN 61408 and command 0x53h.
Explains different operation modes for Input A (Disabled, On/Off, Ground, Frequency, Counter, Encoder).
Explains different operation modes for Input B (Disabled, On/Off, Ground).
Explains setting inputs 7A & 8A for counter operation mode.
Explains using inputs 7A & 8A for encoder mode and associated messages.
Details Status Message 1, covering software version, status bits, and fault codes.
Lists detailed technical specifications and electrical data for the module.
Details the message structure for J1939 output configuration command 0x52h.
Explains the J1939 output control message 0x51h for discrete output operation.
To Next Page
