To Next PageTo Next Page
Need help?Do you have a question about the Murr Elektronik MVK-MP and is the answer not in the manual?
General| Housing | Plastic |
|---|---|
| Operating voltage | 24 V DC |
| Output current | 0.5 A |
| Operating temperature | -25...+60 °C |
| Connection | Screw terminal |
Contact information and address for Murrelektronik GmbH.
Explains symbols used in the manual for safety and information.
Describes intended use, safety guidelines, and prerequisites for operation.
Lists improper uses and requirements for authorized installation personnel.
Details power supply requirements and electromagnetic compatibility guidelines.
Guidelines for cable routing and compatibility for module replacement.
Setting the Profibus address and using the GSD file for configuration.
Explains virtual data modules, channel mapping, and configuration concepts.
Introduces parameter message structure, diagnostic settings, and user parameters.
Instructions for mounting the module and connecting functional earth.
Pin assignments and connection diagrams for various MVK-MP modules.
Details connecting sensors, actuators, and the Profibus interface.
Procedures for safely connecting the module's supply voltage.
Explains LED status indicators for bus run and diagnostics.
Detailed error displays per module type using LEDs.
Breakdown of standard diagnostic information bytes within a message.
Details structure and meaning of channel-specific diagnostic information.
Explains specific error conditions like short circuits, overvoltage, and line breaks.
Physical characteristics, environmental limits, and EMC compliance standards.
Detailed electrical properties including voltage, current, and signal behavior.
Lists available accessories like cables, connectors, and adapter plates.
Maps user parameters to byte assignments for module configuration.
Defines key terms and concepts related to the Profibus communication protocol.
Outlines limitations of liability, copyright, and permitted use of the documentation.
