Murr Elektronik MVK-MP - AO4 (I) DIO4 (DIO4) Art.-No. 55292; AI4 (U) DIO4 (DIO4) Art.-No. 55293

74 pages

To Next Page

To Previous Page

Manual MVK-MP

18 V 3.5

3.2.7 AO4 (I) DIO4 (DIO4) Art.-No. 55292

3.2.8 AI4 (U) DIO4 (DIO4) Art.-No. 55293

Fig. 8: Pin Assignment and Overview Connections

Main Page

Table of Contents2
Important Information5
Configuration8
Power Supply8
Recommended Power Supply Units8
Cable Cross Sections8
Electromagnetic Compatibility (EMC)9
Protection against Electrostatic Discharge9
Grounding9
Cable Routing10
Voltage Drops10
Separate Power Supplies10
Interference Suppression of Inductive Loads10
Other Measures and Limits11
Replaceability12
Installation13
Assembly13
Functional Earth14
Connection Overview15
DO4 (DO4) DI4 (DI4) Art.-No. 5527415
DO8 (DO8) Art.-No. 5529015
K3 DO4(DO4) / DIO4(DIO4) Art.-No. 5529116
DI8(DI8) Art.-No. 5530717
DIO8(DI8) Art.-No. 5530817
DIO8(DIO8) Art.-No. 5530917
AO4 (I) DIO4 (DIO4) Art.-No. 5529218
AI4 (U) DIO4 (DIO4) Art.-No. 5529318
Connection of Digital Sensors and Actuators19
Sensor Supply19
Actuators20
Diagnostic Input at Input Sockets20
Connection of Sensors/Actuators with Diagnostic Output21
Cable Break Monitoring21
Connection of Analog Sensors22
Using Analog Sensors 0 to 10 V22
Using Analog Sensors 0 to 20 Ma or 4 to 20 Ma22
Connection of Analog Actuators23
Using Analog Actuators 0 to 10 V or 2 to 10 V23
Using Analog Actuators 0 to 20 Ma or 4 to 20 Ma24
Connection24
Connection of the Profibus24
Connection of Supply Voltage25
Setup26
Assigning and Setting the Profibus Address26
GSD File26
Configuration27
Relation between Channel Number and Pin/Socket27
Structure of Virtual Data Modules28
Example31
Structure of the I/O Data MVK AO4 (I) Art.-No. 5529232
Structure of the I/O Data MVK AI4(U) Art.-No. 5529334
Parameterization36
How to Code Functions with more than Two Options37
Parameterization of the General Diagnostic Messages37
Parameterization of the Data Format37
Parameterization of Smoothing (AI4 (U) DIO4 (DIO4) Art.-No. 55293)37
Parameterization Functionality of Channels 00 to 07 (Pin 4)37
Parameterization Functionality of Channels 10 to 17 (Pin 2)38
Parameterization Functionality of Analog Channels 0039
Parameterization Safe States of the Digital Outputs39
Structure of Standard-Specific Parameters (Byte 039
Structure of User Parameters39
Example: Configuration of the MVK-MP with the S7 Hardware Manager40
Diagnostic43
LED General Information43
LED Display43
MVK-MP DO4 (DO4) DI4 (DI4) Art.-No. 5527444
MVK-MP DO8 (DO8) Art.-No. 5529044
MVK-MP K3 DO4 (DO4) / DIO4 (DIO4) Art.-No. 5529144
MVK-MP AO4 (I) DIO4 (DIO4) Art.-No. 5529245
MVK-MP AI4 (U) DIO4 (DIO4) Art.-No. 5529345
MVK-MP DI8 (DI8) Art.-No. 5530746
MVK-MP DIO8 (DI8) Art.-No. 5530846
MVK-MP DIO8 (DIO8) Art.-No. 5530946
Structure of a Diagnostic Message47
Byte 047
Device-Related Diagnostics Bytes 6 to 749
ID-Related Diagnostic Bytes 8 to 951
Byte 10 to 12 and Following: Channel-Related Diagnostic51
Possible Channel-Related Diagnostics53
Technical Data54
Data Sheet54
Mechanical Data54
Mechanical Data56
Electrical Data58
Accessories68
User Parameter69
Glossary72
Legal Provisions74

Murr Elektronik MVK-MP - AO4 (I) DIO4 (DIO4) Art.-No. 55292; AI4 (U) DIO4 (DIO4) Art.-No. 55293

Table of Contents

Related product manuals