Murr Elektronik MVK-MP - Example

Manual MVK-MP
V 3.5 31
4.3.3 Example
The configuration software usually supports a visual configuration, so you don’t have to assemble the
configuration string yourself.
This configuration consists of an MVK-MP DIO8(DI8) 55308. The output data for pin 4, the station
diagnostics and diagnostic information for actuator disabling and actuator warning at pin 4 are to be
transferred to the process map in the cyclical data exchange.
 Head module selection.
MVK-MP DIO8(DI8) 55308
01
hex
51
hex
 Selection of the virtual modules in the required order.
Outputs Pin 4
81
hex
00
hex
03
hex
Station diagnostics
41
hex
00
hex
04
hex
Actuator switch-off Pin 4
41
hex
00
hex
07
hex
Actuator warning Pin 4
41
hex
00
hex
08
hex
 The configuration string looks like this (hexadecimal values):
01 51
81 00 03
41 00 04
41 00 07
41 00 08