Murr Elektronik MVK-MPNIO Series User Manual

Configuration/settings
User manual 55530_hdb_en_16 106 / 156
Assign the PROFINET
device name
After having clearly identified a module, you can assign a name.
The IP address is entered automatically by the PNIO controller via DCP (Dis-
covery and Configuration Protocol).
Fig. 8-33: Assign a device name
The address and name resolution is controlled only via this remanently stored
name.
 Select module | Click Assign name.

Murr Elektronik MVK-MPNIO Series Specifications

General

Brand	Murr Elektronik
Model	MVK-MPNIO Series
Category	Control Unit
Language	English