Configuration/settings
User manual 55530_hdb_en_16 93 / 156
Vendor ID (VID)
Tab. 8-28: Vendor ID (VID)
Device ID (DID)
Tab. 8-29: Device ID (DID)
Validation example Vendor ID and device ID
The parameters for validation are represented in the figure with the vendor ID
and device ID of Art-No. 55519.
Fig. 8-28: Example validation_vendor ID and device ID
Tab. 8-30: Vendor ID and device ID Art.-No. 55519
Selection Meaning
2-byte list, byte-wise, values separat-
ed by comma and in hexadecimal
notation.
Vendor ID of the connected
IO-Link device.
Is used for an activated validation (compatible
device).
Selection Meaning
3-byte list, byte-wise, values separat-
ed by comma and in hexadecimal
notation.
Device ID of the connected
IO-Link device.
Is used for an activated validation (compatible
device).
Enter vendor ID and device ID in hexadecimal format.
Enter the values byte by byte and separate with commas.
Validation Decimal (dec) Hexadecimal (hex)
Vendor ID Murrelektronik 303 01.2F
Device ID 786434 0C,00,02
To Next Page
Loading...
Need help?
General
