2
26
SquareFolding
General
The SquareFolder has six different settings. It can be set to [Auto], [Mode 1], [Mode 2],
[Mode 3], [Mode 4] or [Off].
In
[Auto] mode, the Booklet Maker detects how may sheets there are in the booklet, and
automatically set the SquareFolder to the correct mode.
Note
When the SquareFolder is set to [Auto] and the booklet has less than approximately 6
sheets/booklet, the SquareFolder will bypass the Square folding action, transporting the
booklet out to the Belt stacker.
Use the manual modes to override the auto function. There are four different manual
modes to select from.
Mode 1: Approximately 6 to 11 sheets. Decreased amount of square forming.
Mode 2: Approximately 12 to 16 sheets. Medium amount of square forming.
Mode 3: Approximately 17 to 23 sheets. Increased amount of square forming.
Mode 4: Approximately 24 to 25 sheets. Maximum amount of square forming.
Select [Off] to bypass the SquareFolder
Selecting SquareFolding mode
From the Ready screen, scroll down to SQF 200 and
press the [Change] button.
Sele
ct [Auto], [Mode 1], [Mode 2], [Mode 3], [Mode
4] or [Off] with the [arrow] button and press the [OK]
button.
Making Booklets
To Next Page
Loading...