2
28
On-line
From the Ready screen, scroll down to Mode and
press the [Change] button.
When used on-line with a collator, the Booklet Maker operating speed can be set to normal
or fast. The normal setting is optimized for highest booklet quality and the fast setting is
optimized for highest speed.
Select either [Normal] or [Fast] and press the [OK]
button.
Note
For further instructions on operating the Booklet Maker with the collator refer to the collator
operating manual.
Making Booklets
Hand feeding, continues
Start hand feeding by inserting the sets between
the side guides as illustrated.
Note
If optimum productivity is required when there is
a SquareFolder in the system, choose a dened
mode (bypass or mode 1 to 4) instead of [AUTO].
See page 26.
To Next Page
Loading...
