Page 52
(c) Lamp Test
1. Press the Service button to select LAMP TEST and press the Test button. The
following screen is displayed.
2. Press the Service button to select the required item then press the Test button.
3. Press the Service button to select ‘EXIT’ then press the Test button to return to
the I/O Test Menu Screen.
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
I/O TEST
LAMP TEST
ITEM BUTTON OFF
CANCEL BUTTON OFF
EXIT
(a)
(b)
(a) ITEM BUTTON : Display changes from OFF to ON and the button lamp
lights when the Test button is pressed.
(b) CANCEL BUTTON : Display changes from OFF to ON and the Versus
Race Cancel button lamp lights when the Test button is
pressed.
To Next Page
Loading...
Need help?
General
