Page 73
7-9 Replacing the Steering Potentiometer
1. Remove the steering assembly. (see 7-8 page 71)
2. Remove 2off hex socket head screws (M4x10) holding the potentiometer
mounting bracket to the front plate.
3. Slacken the grub screw (M4x10) and remove the potentiometer complete with the
mounting bracket.
4. Replace the potentiometer taking care to replace the correct colour wire to the
correct terminal.
5. Reassemble in reverse order.
Note: When refitting the potentiometer ensure that the grub screw engages on the flat
of the potentiometer shaft.
6. After replacing the potentiometer ensure that the game is re-initialized. (see
5-4 page 40)
Hex socket head screw (M4x10)
screw (M4x10)
Potentiometer
Mounting bracket
To Next Page
Loading...
Need help?
General
