Page 49
6-3-3-1 I/O PCB Check
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
Note: This screen is for information only. No adjustments are available.
6-3-3-2 How to [I/F Initialize]
Select ‘How to [I/F Initialize]’ from the I/O Test menu. The following
screen is displayed.
Note: Initialization cannot be executed from this screen. (see 7 page 57)
I/O TEST
DIP 4
12345678 [ON=RED]
LINK
ON 2
HOW TO [I / F INITIALIZE]
***********************
* I / F INITIALIZE *
* HOLDING SERVICE SW *
* AND TURN ON TEST SW *
***********************
EXIT
I/O TEST
DIP 4
12345678 [ON=RED]
LINK
ON 2
I/O PCB CHECK
master TX 3536 NAMCO LTD.
RACE ON! ; Ver 1.00 ; JPN
I/O PCB CONNECT OK NAMCO LTD.
ASCA-4
EXIT
To Next Page
Loading...
Need help?
General
