Index
© National Instruments Corporation I-9 Getting Started with SCXI
T
TBX terminal blocks. See terminal blocks.
technical support resources, B-1
temperature sensors
cold-junction compensation, 4-5
RTD analog input channels, 4-24
signal routing
SCXI-1120/D, 3-13
terminal blocks, 4-4
connecting half-bridge gauge to
SCXI-1321 terminal block (figure),
4-10
description, 1-7
direct-mount (table), 1-9
onboard temperature sensors for
cold-junction compensation, 4-5
opening SCXI-13XX terminal block, 4-6
options (figure), 1-8
SCXI-13XX terminal blocks, 4-4
TBX terminal blocks
available TBX terminal blocks
(table), 1-12
cabled to SCXI module (figure), 4-4
compatibility with SCXI modules
(table), 4-5
overview, 4-4
thermocouples, 4-7
noise and filtering, 4-9
problems and solutions, A-3
SCXI-1100, 4-7
SCXI-1102/B/C, 4-8
SCXI-1112, 4-8
SCXI-1120/D, SCXI-1121, SCXI-1122,
and SCXI-1125 modules, 4-8
transducers, 4-7
chassis ground connections, 4-31
RTDs, 4-19
analog circuitry, 4-23
analog input channels, 4-24
analog output channel signal
connections to SCXI-1124, 4-28
connecting to SCXI-1121 module
(figure), 4-21
connectingtoSCXI-1320terminal
block, 4-19
excitation channel signalconnections
on SCXI-1122, 4-22
excitation output channels, 4-25
verifying high-common-mode
voltage (warning), 4-19
strain gauges, 4-9
connecting half-bridge gauge to
SCXI-1321 terminal block
(figure), 4-10
full-bridge configuration (figure),
4-14, 4-16, 4-17, 4-18
half-bridge configuration (figure),
4-13
quarter-bridge configuration I
(figure), 4-12
quarter-bridge configuration II
(figure), 4-12
requirements for using, 4-9
verifying high-common-mode
voltage (warning), 4-9
thermocouples, 4-7
noise and filtering, 4-9
problems and solutions, A-3
SCXI-1100 module, 4-7
SCXI-1102/B/C module, 4-8
SCXI-1112 module, 4-8
SCXI-1120/D, SCXI-1121,
SCXI-1122, and SCXI-1125
modules, 4-8
troubleshooting SCXI problems, A-1
W
Web support, B-1
worldwide technical support, B-2