National Instruments SCXI Series Getting Started

Chapter 4 Connecting and Using Accessories and Transducers
Getting Started with SCXI 4-6 www.ni.com
Opening the SCXI-13XX Terminal Block
You open terminal blocks the same way that you open modules. Figure 4-2
shows the back of the terminal block.
Figure 4-2. Removing the Terminal Block Grounding Screw
To open the terminal block, remove two cover screws as shown in
Figure 4-3.
Figure 4-3. Removing the Terminal Block Cover
To replace the cover plate, align the cover at the top of the terminal block
and replace the two screws.
Grounding Screw

National Instruments SCXI Series Specifications

General

Brand	National Instruments
Model	SCXI Series
Category	Control Unit
Language	English