An edit icon appears when the mouse curser is placed over the REAKTOR logo
To open a floating window for the plug-in:
1.
Place your mouse cursor over the plug-in icon; an EDIT button appears.
2.
Click the EDIT button to open the plug-in in a separate floating window. A second click
on the
EDIT
button will close the plug-in window.
4.6 Mute & Solo
Muting is used to bypass the audio signal of either a Sound or a Group, whereas Soloing is
pretty much the opposite: it mutes all other Sounds and Groups, so that you can listen to
the selected Sound or Group alone. The combination of both is a useful means to play live
and to test different sequences together.
4.6.1 Hardware
Solo
Press the SOLO button and hold it: now you can solo Sounds by pressing their pads, and
Groups by pressing the corresponding Group buttons. Solo is a temporary mode, therefore
you will have to hold the SOLO button to access it. If you press SOLO and Button 1 at the
same time, the Solo function gets pinned, e.g. you stay in Solo mode until you press SOLO
again.
Mute
The Mute mode works in the same way as the Solo mode: hold the MUTE button to mute
Sounds by pressing their respective pads, and Groups by pressing the Groups buttons. You
can also pin the Mute function by pressing Button 1 at the same time and unpin it by
pressing MUTE again.
Creating a Pattern
Mute & Solo
MASCHINE - Getting Started - 57
To Next Page
Loading...
Need help?
General
