5.1.6 Distortion
▪ Distortion: Combining overdrive, feedback and modulation, the Distortion produces a
heavy distortion/fuzz effect.
▪ Lofi: The Lofi effect reduces the Bitrate and Sample Rate of the audio signal for an
interesting “vintage” effect at subtle settings, and heavy digital distortion at extreme
settings.
▪ Saturator: The Saturator combines compression and saturation to increase the overall
loudness and add additional harmonics. The Contour control determines how closely
it responds to the input volume.
5.2 Applying Effects to a Sound
There are four Module Slots available at the Sound level. Using each Module Slot, you can
apply up to four MASCHINE effects and VST/AU plug-in effects directly to each Sound
Slot.
Module 1 is often used to contain a Sampler or live Input so choose one of the free Modules
(2-4) to insert an effect.
If you plug one of the internal MASCHINE effects or a plug-in effect to Module Slot 1 of a
Sound, you will find this effect as a bussing point in the Output menu of other Sound Slot's
Main control section (in the Control Area). You can also route MIDI events to the effects in
Module Slot 1.
Hardware
1. Press the CONTROL button to select the Control mode.
2. Press Button 3 to put the focus on the SOUND tab which is selected on the left dis-
play, then hit the pad with the Sound you want to apply the effect to.
3. Press Button 4 to put the focus on the MODULES tab.
4. On the right display, you can now see the Modules 1-4. Select Module 2 by pressing
Button 6.
Using Effects & Routing
Available Internal Effects
MASCHINE - Getting Started - 62
To Next Page
Loading...
Need help?
General
