Native Instruments Maschine Getting Started Guide

2. Now the right display shows the Modules containing effects. To bypass one of the ef-
fects, press SHIFT followed by either Button 5 (for Module 1), Button 6 (for Module
2), Button 7 (for Module 3) or Button 8 (for Module 4).
3. To hear the effect again, press SHIFT followed by the respective Button (5-8).
Software
1.
Select the Tab where you want to bypass the effect (either
SOUND
,
GROUP
or
MASTER
) by
clicking on it.
2. Make sure you have the right Sound (click on it on the left of the Grid) or Group (click
on it on the left of the Arranger) in focus. For the Master, select the
MASTER
tab.
3. Now click on the label (orange if it is a Sound, blue if it is a Group, white if it is the
Master) on the left side of the effect Modules to bypass the desired effect. Click the
label again to hear the effect signal.
Using Effects & Routing
Bypassing Effects
MASCHINE - Getting Started - 69

Native Instruments Maschine Specifications

General

Brand	Native Instruments
Model	Maschine
Category	Recording Equipment
Language	English