Navico Simrad RS100 User Manual

ATIS ID (EU country mode only)
Enter an ATIS number to access the radio’s ATIS functionality. This unique identifier must be supplied a
local radio spectrum authority. DO NOT enter a random ‘made up’ number.
¼ Note: Contact a Simrad or B&G dealer if you need to change your ATIS ID after initial input.
Individual acknowledge
The radio can be configured to automatically acknowledge an incoming ‘individual’ call, or require manual
intervention:
Auto
After a 15 second delay, radio will switch to requested channel, and send an automatic acknowledgement,
ready for conversation.
Manual
Operator must manually choose to send acknowledgement as well as change to requested channel.
¼ Note: Only applies to call type ‘Individual’.
Position acknowledge (request)
The radio can be configured to automatically acknowledge an incoming ‘position request’ call, or require
manual intervention to acknowledge, or ignore the call:
Auto
Sends current position automatically to calling radio.
Manual
Operator must manually choose to send position information.
OFF
All incoming position requests are ignored.
Auto switch (channel)
When an All Ships or Group DSC call is received, it may include a request to change to a specific channel
for subsequent communications.
With AUTO SWITCH set to ON:
The radio will switch channels after a 10 second delay. The radio will also display options to switch
immediately, or reject the request and stay on the current channel.
With AUTO SWITCH set to OFF:
• The following symbol will be displayed:
• Any channel change request will require manual confirmation.
Test acknowledge
The radio can be configured to automatically acknowledge an incoming test call, or require manual
intervention:
Auto
The DSC test call is automatically acknowledged after a 10 second delay.
Manual
Operator must manually choose to send acknowledgement, or cancel.
Receive distress while OFF
Enabling this feature will allow the radio to raise an alert for DSC distress calls, even when the DSC feature
is turned off. This works regardless of whether or not an MMSI number has been entered.
| 27
Radio menus | RS100 / RS100-B / V100 / V100-B User Manual

Navico Simrad RS100 Specifications

General

Brand	Navico
Model	Simrad RS100
Category	Receiver
Language	English