Navico Simrad RS100 - GPS, Wireless, and Handset Specifications; Built-in GPS and Wireless Specs; Handset and Cradle Charger Specs

Built-in GPS Receiver
Receiving frequency: 1575.42 MHz
Tracking code: C/A code
Number of channels: 72 channels
Horizontal accuracy: <10 m
Position fixing time: Warm start: 30s, Cold start: 90s
Position update interval: 1 second typical
Wireless specications
Wireless standard: 802.11 b/g/n20
Operating frequency: 2412~2472 MHz (for EU); 2412-2462 MHz (for US)
Rx Sensitivity (802.11 b - 11 Mbps): -86 dBm (+/-2)
Tx Power (802.11 b - 11 Mbps): 9.77 dBm (Declaration for EU Compliance)
Functional range: 80 m (Blackbox dipole antenna -> handset; direct line of
sight, no obstructions)
HS100 / H100 - Fixed handset
LCD display: FSTN 256x160 pixels, monochrome
Contrast control: Yes
Backlight synching: Yes, via NMEA 2000 network
Backlight: White LED; adjustable in 10 levels; Day and Night mode
HS40 / H60 - Wireless handset
LCD display: FSTN 256x160 pixels, monochrome
Battery (internal): Li-Ion (lithium Ion); 3.6 V 2050 mAh (5.1 Wh)
Charging system: Inductive charging when set on cradle charger (BC-12)
Wireless standard: 802.11 b/g/n20
Operating frequency: 2412~2472 MHz (for EU); 2412-2462 MHz (for US)
Rx Sensitivity (802.11 b - 11 Mbps): -86 dBm (+/-2)
Tx Power (802.11 b - 11 Mbps): 9.81 dBm (Declaration for EU Compliance)
Functional range: 70 m (handset -> base station; direct line of sight, no
obstructions)
Handset cradle charger (BC-12)
HS40 cradle charger voltage: 12V DC battery system (negative ground)
HS40 cradle charger DC current drain: ≤0.5 A
Charger operating frequency: 131.125 KHz-176.600 KHz
Charger max. RF power: -10.88 dB µA/m @ 10 m
Environmental: IPx7
¼ Note: Specifications are subject to change without notice.
69 |
RS100/B, V100/B Specications | RS100 / RS100-B / V100 / V100-B User Manual