Additional Vessel data will be transmitted once these details are completed.
Ship name Enter the ship’s name; maximum 20 alpha-numeric characters.
Call sign Enter your VHF radio call sign – this must be supplied from your local radio spectrum
authority. Will automatically show if it was entered during the initial startup of the
radio.
MMSI Your DSC MMSI number. Will automatically show if it was entered during the initial
startup at first turn on of the radio, or during DSC setup.
Vessel type Scroll through the list to best select your vessel type.
A Enter the dimension in meters from the bow to the center of the vessels GPS antenna.
B Enter the dimension in meters from the stern to the center of the vessels GPS anten-
na.
C Enter the dimension in meters from the port side to the center of the vessels GPS
antenna.
D Enter the dimension in meters from the starboard side to the center of the vessels
GPS antenna.
¼ Note: Dimensions A + B, or C + D cannot = 0.
Use the
and keys to select a field and then press OK to select. Press / to then select a
character then press OK to select. The cursor will move to the next digit.
Once you are satisfied all details are entered correctly, press:
• TRI key to save the details; OK again to confirm save, or,
• X key to exit and not save; X again to confirm exit without saving the details.
¼ Note: Each field can only be entered once so ensure the details are correct before selecting Save.
⚠Important: Once all AIS fields are completed, the menu ‘Config Vessel AIS static data’ will then change
to ‘View Vessel details (AIS static data)’ and you will only be able to view AIS details.
View vessel details (AIS static data)
Once all Vessel Details fields are entered and saved, select View Vessel Details to view the AIS static data
details.
¼ Note: Contact a Simrad or B&G dealer if you need to change the vessel details after saving.
Alarms
The radio provides audible and visual alerts for critical functions. Alert settings can be adjusted to you
convenience.
| 29
Radio menus | RS100 / RS100-B / V100 / V100-B User Manual
To Next Page
Loading...
Need help?
General
