NComputing L230 User Manual

NComputing L-Series User Manual rev.05.07.12
Page 37 of 95
Device Information
The following information can be viewed from the Device Information screen:
o Device name
o Device ID
o Firmware version
o Serial number
o Interface
o IP address
o Subnet mask
o Gateway
o MAC address
o IP conflict
o Link detected
The “Device Setup” Screen
The Device Setup screen holds all of the device’s configuration data, which is divided into the following
categories:
• Connection Settings (default tab)
• Manage Groups
• Login Settings
• Network
• Password
• Update
When you are finished configuring device settings, you can click “OK” to save changes and exit the Setup
screen, click “Apply” to save your changes and remain in the Setup screen, or click “Cancel” to exit the
Setup screen without saving your changes.
Note: If changes have been saved with the “Apply” button, clicking “Cancel” will not undo them.

NComputing L230 Specifications

General

Brand	NComputing
Model	L230
Category	Wireless Access Point
Language	English