NComputing L230 User Manual

NComputing L-Series User Manual rev.05.07.12
Page 31 of 95
Using Your L130 and L230 Access Devices
The available connection list shows the vSpace hosts to which the device can connect. Select a
host from the list and click on the "Connect" button to start.
The "Refresh" button refreshes the available connection list.
The Options Menu
The "Options" button brings up a menu where you can view and change the access device's
settings.
Within the “Options” screen, the "Reset" button resets the access device
The "Info" button brings up a window to view the following information about the access device:
• Version: the version of firmware running on the access device
• Build: The build number of the firmware running on the access device
• Date: The date of the firmware running on the access device
• Device Model: The model number of the access device
• Loaded Schema Version: The schema version running on the access device
• IP Address: The IP address the access device is configured to use
• Gateway: The IP gateway the access device is configured to use
• MAC Address: The MAC address of the access device
• Serial Number: The serial number of the access device
• Alias: The alias of the access device, defined using the vSpace admin console
• "Loaded from . . .": How the access device loaded its latest firmware update.

NComputing L230 Specifications

General

Brand	NComputing
Model	L230
Category	Wireless Access Point
Language	English