NComputing L-Series User Manual rev.05.07.12
Page 67 of 95
2.3 System Settings - Common
Left-click on the “System Settings” section of the left navigation tree to display settings that affect the
host, as well as devices that connect to it. The “Common” tab provides the following options and
information:
Computer Name The system name of the vSpace host
System Uptime
Displays the length of time the host has been running without interruption.
Reboots and shut-downs will reset this counter.
Main Station
Auto Logon
Enabling this feature with a valid user name and password will cause the host to
automatically log in to Windows when it boots. Otherwise, a user will need to
manually enter a user name and password each time the host starts up.
Session Cleanup
Timeout
This value determines how long the host will wait before closing a user session
after its device disconnects. A larger value provides a longer “grace period” during
which users can re-connect their device without losing progress.
Send Message
Policy
This setting controls the NC Message feature, which allows devices to send
messages to each other. Full allows users to send messages to all connected
devices. Point-to-point restricts messages to a single target device. Disabled turns
this functionality off entirely.
To Next Page
Loading...
Need help?
General
