6-3
The 'NCT-2000-XP Management Console' window appears when the
<Local Settings> is selected from the menu. After inputting the
password, please click on the <OK> button. (If the 'Disable password
protection' was selected during the installation of the application, the
'NCT-2000-XP Management Console' does not appear.>
Note
1
Sessions
The information on the station, which is currently connected, and
the standby status of the station for the connection can be viewed
when 'Stations' is selected.
Session #01, #02, #03 …
The programs and all the information, which are being used
by the station that is currently connected, can be checked
when the session is selected.
The following information is the information tab for each
session.
● Station names : Displays the number of the selected station.
The numbers are provided in the order of the
connection to the host computer, which
starts from Station #02.
● Logged in use : Displays the name of the user who is logged
in on the station.
● Default user : Displays the name of the user who has logged
on recently.
● Status : Displays the current connection status of the station.
● Client connection : Displays the automatic launch status of
the station which is connected.
To Next Page
Loading...
Need help?
General