6-7
Hardware Settings (LAN/Local)
The user can set the status of the connected PC Expanions and change
the options.
4
1
UTMA/UTSA Devices
Settings for the connected PC Expanions can be changed from the
administration console. (“UTMA/UTSA Device” shows information
about the PC Expanions connected to the network.) Select the PC
Expanion of which the settings are to be changed and click
“UTMA/UTSA Device Setup” to change the setting.
The <Column> option delete displays the various columns.
If you click the <Column> button, you can select the column list.
Device Information
The status of the connection and the serial number.
Firmware
The version, the build number, the schema ID, the device ID,
and the boot server of the PC Expanion.
To Next Page
Loading...
Need help?
General