EasyManuals Logo

NComputing PC Expanion L100 User Manual

NComputing PC Expanion L100
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
7-2
Options or TS Options
You can set the host computer to be connected to the PC Expanion and
set the resolution and user name for the host computer. Select
Autodetection, TS 2 or TS 3 in the TS Options screen and click the
<Enable-Disable> button. It will then be displayed in the <Connection
to> list on the PC Expanion initial screen. Select Autodetection to search
for host computers in which the NCT-2000-XP program is installed. It will
list up to 8 of the computers found and the * symbol appears in front of
the host computer names. Select TS 2 or TS 3 to specify and connect to
a computer. If you select TS 2 or TS 3, TS 2 or TS 3 will appear without
the * symbol. To change the settings for a host computer to be
connected, click the <Edit> button.
󳦈
Connection Name : You can enter a host computer name. This name
should be different than the name set in the host
computer you are using. If you have selected
Autodetection, you cannot change this field.
Autodetection searches for host computers in the
network and shows the names set in the computers
as they are. However, if you have selected TS 2 or
TS 3, you can rename a computer.
User Name : You can set a user name that will be used to logon a host
computer. If you enter a user name, the name appears in
the user name field on the Logon screen.
Program : If you select Desktop, you can use the operation system
without changing it. If you select Start following program,
only the specified program will be launched. If you exit the
program, you are automatically logged off. For example, if
you want to use the Notepad program only, type
notepad.exe in the Program field and then the location of
the application file in the Folder field such as C:\
󳢵
.
Desktop size : You can select the resolution and frequency of your PC
Expanion screen. The available resolutions may differ
depending on the model. To confirm if a resolution is
supported by the monitor before applying it, select a
resolution and click the <Mode Test> button. When you
logon, a resolution configured here is applied regardless
of the resolution you set on Windows after logon.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NComputing PC Expanion L100 and is the answer not in the manual?

NComputing PC Expanion L100 Specifications

General IconGeneral
BrandNComputing
ModelPC Expanion L100
CategoryTouch terminals
LanguageEnglish