8-41
Click the <Connection Settings> in the “UTMA/UTSA Device
Overview” window.
2
Select the host PC that is connected to the PC Expanion in the
“UTMA-/UTSA-Server Connection list.”
Then click <Edit> button.
3
Select the Desktop size and the
frequency. Then click the <OK>
button.
4
In order to save the changes, the PC Expanion must be restarted. Click
the <Yes> button in order to restart the PC Expanion
5
If the user is currently using the specific PC Expanion, the following
message appears. Click the <Yes> button and the PC Expanion will be
restarted.
If the specific PC Expanion is turned off or if the PC Expanion is not on
the network, the following image appears. Click the <OK> button.
Note
To Next Page
Loading...