NCR RealPOS 5953 - Page 36

3-12 Chapter 3: Hardware Installation
Allunlabeledkeysarenon‐functionalinSetupKeypadMode.Ignore
anystuckkeyerrormessagesdisplayedasaresultofthekeysbeing
helddown.
3. Pressthe[F2]keytoputitintotheBIOSconfigurationroutine.
4. Usethespecialkeypadlayouttorunthesystem’sBIOS

Configurationroutine.
Note: TheDynaKeySetupKeypadModeisprovidedsimplyasa
conveniencefeature.Ifyouprefernottousethismode,simply
connectanexternalkeyboardtooneoftheDynaKeyUSBportsto
useforsystemconfiguration.