NCR RealPOS 5977 - Double Byte Code Page Select

6-109 NCR 5977 Graphical Display Programming
Double Byte Code Page Select
Format
1F 28 67 0F nn
where nn = double byte character code page font
• 00 — Japanese JISX0208 (Shift JIS)
• 01 — Korean (KSC5601-87)
• 02 — Simplified Chinese (GB2312-80)
• 03 — Traditional Chinese (Big-5)
Default: nn = 01
Description
This command selects the double byte code page. This command requires the Set font
size 1F 28 67 01 02 command & Enable double byte character mode 1F 28 67 02 01. Refer
below for an example.
Select the font size
1F 28 67 01 02
Enable Double Byte Mode
1F 28 67 02 01
Select Double Byte Code Page
1Fh 28h 67h 0Fh 02h
Send Double Byte Character
B0 A2 (double byte character code)