NCR RealPOS 5977 - Appendix A: NCR 5977 Migration Path; Migration to NCR 5977 2 x20 Display

Appendix A: NCR 5977 Migration Path
This section contains information on migration path for customers that are currently
using old NCR line display products (NCR 5975 and NCR 5976) and are planning to
move to the new NCR 5977 display.
NCR 5977 2x20 Customer Display (5977-1000)
In an event that the NCR 5975 and NCR 5976 legacy 2x20 customer displays are
discontinued, it is recommended that customers move to the new NCR 5977 2x20
Customer Display.
The NCR 5977 is not a drop–in replacement for older NCR line display products.
However, it requires the latest version of the Retail Platform Software for Windows
(RPSW) for it to be detected by the POS Terminal.
The following table shows the minimum RPSW software requirement for the NCR 5977
to work correctly.
NCR Product Affected PIDs RPSW Software Required
5975 2x20 Customer
Display
5975-1000-9082
5975-1001-9082
32-bit: RPSW 4.2.0.0 or later
64-bit: RPSW 5.2.0.0 or later
5976 2x20 Customer
Display – Native Mode
5976-1100-9090
5976-1200-9090
5976-1300-9090
5976-1281-9090
5976 2x20 Customer
Display – Compatibility
Mode
5976-1175-9090
5976-1275-9090
5976-1375-9090