8-141 Software Utility
Generating Code Page
The Code Page Utility includes a Code Page Generator application that converts a 2x20
Retail Display 7x9 dot matrix code set representation into the lowest level databit
representations that are used inside the 5976 firmware program. The code set is specified
to this program in the form of a text file which represents the 7x9 matrix for each of the
256–member character set.
To generate a code page, perform the following steps:
1. Launch the ROMFlasher by running ROMFlasher.exe as administrator.
The application displays the ROM Flasher user interface.
To Next Page
Loading...
