Software Utility 8-142
2. Select CodePage Flasher from the ROM Flasher window. The application displays
the 5976 Utility window.
Note: The following window displays the code pages for a USB interface
connection. To display the existing code pages for the RS–232C connection, select
RS–232C from the Interface field. Select Refresh.
3. To load an input file into the Code Page utility, select Browse beside the Input File
field of the Code Page Generator section.
4. Locate the input file (*.dat file) used to generate the code page.
5. Specify a filename and destination for the output text file by selecting Browse beside
the Output File field.
To Next Page
Loading...
