NCR RealPOS 5977 - Adjusting Brightness Level

Service Support Utility 9-158
Brightness Level Adjustment
On power up, the default brightness setting is 5 (100%).
Change the Brightness Level
To adjust the brightness level of the device, perform these steps.
Windows
1. Go to Windows directory (C:\Windows).
2. Go to the 5976LDSettings folder.
3. Open Settings.ini.
4. Change the Brightness value to one of the following :
• 1 for 20% brightness
• 2 for 40% brightness
• 3 for 60% brightness
• 4 for 80% brightness
• 5 for 100% brightness
5. Save the file.
6. Reboot the terminal.
Linux
1. Go to the /usr/local/ directory.
2. Go to the 5976LDSettings directory.
3. Open Settings.ini.
4. Change the Brightness value to one of the following :
• 1 for 20% brightness
• 2 for 40% brightness
• 3 for 60% brightness
• 4 for 80% brightness
• 5 for 100% brightness
5. Save the file.
6. Reboot the terminal.