7-122 Retail Platform Software
13. Upon successful installation, the application confirms the completion. Select Finish.
Console Mode
1. Open a terminal.
2. Create a new directory by entering the command:
mkdir <destination directory>.
Note: The RPSL is installed at the destination directory. In this example, the
directory is named /mnt/iso.
3. Extract the downloaded installer to the new directory by entering the command:
mount –o –loop –t iso9660 D370–0699–0100_REL.2.1.5.6.iso <destination
directory>
Note: In this example, D370–0699–0100_REL 2.1.5.6 is the downloaded version.
Other versions might be available.
4. Enter cd <destination directory>.
To Next Page
Loading...
